Trimble FM-1000 - Create a field feature

6 Field feature mapping setup Field feature mapping settings
Assign feature buttons
To assign the feature buttons that will be available on the Mapping Guidance panel in the Run
screenn:
1. At the Feature Mapping screen, tap one of the four buttons under the Selected Features section.
The Select Feature screen displays.
2. At the top left-hand list, choose the type of feature:Area, Line or Point. The options available to
you for that feature type are listed below.
3. Select the feature option you want and tap OK.
Create a field feature
To create a feature in your field:
1. At the Feature Mapping screen, tap one of the four buttons under the Selected Features section.
The Select Feature screen displays.
2. At the top left-hand list, choose the type of feature:Area, Line or Point.
3. Tap New. The Edit Area/Line/Point Feature screen displays.
4. Tap in the entry box for the name of the feature. The Enter Area/Line/Point Feature Name
screen displays.
5. Enter the name of the feature and tap OK. You are returned to the Edit Area/Line/Point Feature
screen.
6.
Complete the settings for the feature you have added. For specifics, see:
ll Field area feature settings (page 146)
l Line feature settings (page 147)
l Point feature settings (page 150)
7. Tap OK. The Feature Mapping screen displays again, showing the button of the feature you
just created.
Version 9.25, Revision B FM-1000 Integrated Display User Guide 143