Trimble FM-1000 - WM-Drain setup

16 Water Management setup WM-Drain setup
WM-Drain setup
1. If you have not completed implement setup, complete this before continuing.
2.
At the Configuration screen, select WM-Survey and then tap Setup. The WM-Drain Setup
screen displays.
3.
Complete the settings on each tab:
ll Implement control settings (page 312)
l Limit and increment settings (page 314)
l Relative heights settings (page 315)
l Valve settings (page 314)
l Operation settings (page 315)
4. Tap OK when you have completed all the settings.
5. Calibrate the valve (page 321).
For operational information, see WM-Drain operation (page 451).
Version 9.25, Revision B FM-1000 Integrated Display User Guide 311