TrueTracker 14 TrueTracker setup
TrueTracker
The TrueTracker implement steering system is an optional upgrade for the Autopilot automated
steering system. When the TrueTracker system is added to the Autopilot system, the implement
receives separate guidance and steering to increase accuracy.
Implement steering actively steers the implement being towed by the vehicle. This prevents the
implement from pulling to one side (called implement draft):
l On extremely sloped ground
l In variable soil conditions
l On curved guidance patterns
TrueTracker supports:
l Steering in reverse
l Straight and curved guidance patterns
l Independent implement offset
l Independent aggressiveness control for the implement
l Zero steering to center the coulters
The system has two parts:
l Additional hardware installed on the implement (which requires professional installation)
l Additional FM-1000 integrated display software provided by TrueTracker
For operation information, see TrueTracker operation (page 423).
274 FM-1000 Integrated Display User Guide Version 9.25, Revision B
To Next Page
Loading...