3 Basic settings Basic system settings
Restore default settings
You can reset the FM-1000 integrated display to its default values. This can be useful if:
l You made changes to the display settings. The results are poor, but you cannot determine
which setting was the cause.
l You move the display from one vehicle to another.
Note – If you restore the defaults, the Autopilot vehicle setup information is not reset.
To restore the default settings:
1.
At the Configuration screen, select the System option and then tap Setup. The Display Setup
screen displays.
2. Tap Default. A confirmation screen displays.
3. Tap Yes. The default settings are restored.
Version 9.25, Revision B FM-1000 Integrated Display User Guide 67
To Next Page
Loading...