Unlocks and upgrades 3 Basic settings
4. Enter the password that your local reseller provided and then tap OK. If you entered:
a. A correct password, an Enabled message displays. The plugin is now unlocked.
b. An invalid password, an error message displays. Enter the password again. If it still does
not work, contact your local reseller.
Upgrade FM-1000 integrated display firmware
1. Transfer the new firmware file from www.trimble.com to your computer.
2. Connect a USB drive to your computer.
3. Unzip the firmware file. Save it to the root folder of the USB drive.
4. Insert the USB drive into the USB socket on the rear of the FM-1000 integrated display.
5. Press the power button on the rear of the display to turn on the display and then wait for the
Home screen to appear.
6. Tap Upgrade. The Firmware Upgrade screen displays.
7. Select a firmware file from the Firmware list and tap Upgrade.
8. After the upgrade is complete, tap OK. The system restarts.
46 FM-1000 Integrated Display User Guide Version 9.25, Revision B
To Next Page
Loading...