Field feature mapping settings 6 Field feature mapping setup
Edit a field feature
To edit a feature you have placed in your on-screen field:
1. At the Feature Mapping screen, tap one of the four buttons under the Selected Features section.
The Select Feature screen displays.
2. At the top left-hand list, choose the type of feature:Area, Line or Point.
3. Tap Edit. The Edit Area/Line/Point Feature screen displays.
4. To edit the name:
a. Tap in the entry box for the name of the feature. The Enter Area/Line/Point Feature Name
screen displays.
b. Enter the name of the feature and tap OK. You are returned to the Edit Area/Line/Point
Feature screen.
5.
Edit the settings for the feature you have added. For specifics, see:
ll Field area feature settings (page 146)
l Line feature settings (page 147)
l Point feature settings (page 150)
6. Tap OK. The Feature Mapping screen displays again, showing the button of the feature you
just edited.
144 FM-1000 Integrated Display User Guide Version 9.25, Revision B
To Next Page
Loading...