Trimble FM-1000 - Engage settings for TrueTracker system

14 TrueTracker setup Setup process
Engage settings for TrueTracker system
At the Implement Controller Setup screen's Engage tab, complete the settings as appropriate.
Setting Explanation
Operator Timeout Amount of time allowed before the operator receives an alert
for lack of activity. If the operator fails to respond to the alert,
the vehicle begins to drive in a tight loop.
Coverage Log
Manual: Coverage logging starts only after you tap .
When Engaged: Coverage is logged when the Autopilot system is
engaged if no other system is controlling logging (such as Field-
IQ or Yield Monitoring). This setting can be edited in both the
vehicle and implement setup. A change in one setup location
will show up in the other setup location.
Two State Engage
Off
:The
Engage
button engages with one tap:
l First tap:Engages implement and vehicle steering
l Second tap:Disengages both implement and vehicle
steering
Implement First:The Engage button engages with one tap:
l First tap: Engages the implement steering
l Second tap: Engages the vehicle steering
l Third tap: Disengages both implement and vehicle
steering
Vehicle First:The Engage button engages with one tap:
l First tap: Engages the vehicle steering
l Second tap: Engages the implement steering
l Third tap: Disengages both implement and vehicle
steering
Version 9.25, Revision B FM-1000 Integrated Display User Guide 279