9 Field-IQ system setup Control setup
Rate control tab
At the Rate Control tab, complete the settings.
Setting Explanation
Rate Control
Select ON to have the Field-IQ system operate a rate control
component. The system sets the target rate.
Select OFF for no rate control. Section switching only.
Rate Control Module Location Tap Setup to configure the rate control module(s), their
location on the implement, and the width they will control.
Drive Setup
Tap to set up the drive. Complete the settings on these tabs:
l Valve Setup tab (page 224)
l Feedback setup tab
l Advanced
Version 9.25, Revision B FM-1000 Integrated Display User Guide 223
To Next Page
Loading...