18 Operations Field-IQ operation
Field-IQ operation
WARNING – When the implement is down and the master switch is in the On position, the machine is fully
operational. Take all necessary precautions to ensure user safety. Failure to do so could result in injury or death.
1.
At the Home screen, tap .
2. At the Current Configurations screen, configure the display/vehicle/ implement settings and
then tap OK.
3. At the Field Selection screen, select the required client/farm/field/event settings and then tap
OK.
For setup information, see Field-IQ system setup (page 210).
Version 9.25, Revision B FM-1000 Integrated Display User Guide 385
To Next Page
Loading...