Control setup 9 Field-IQ system setup
Setting Explanation
need to lower the manual rate increment.
l If the valve is slow to respond when in manual rate you
need to increase the manual rate increment.
Minimum Rate
Sets the minimum rate increment.
Maximum Rate
Sets the maximum rate increment.
Note –
If you don’t want the system to be capable of applying
more than 100 units, set the maximum rate to 100 units.
2.
If no materials are listed, create a material that you can assign. See Material setup (page 210).
Note – You can also assign the correct material later using the Material Assignment option, see Material
assignment (page 392).
3. Tap Next to go to the Layout (page 217).
216 FM-1000 Integrated Display User Guide Version 9.25, Revision B
To Next Page
Loading...