15 Vehicle Sync setup Setup steps
4.
On the Data tab, complete the settings and tap OK.
When there is excessive data transfer, the FM-1000 integrated display may slow down. To help
with this, it may be useful to limit the amount of data sent back and forth between displays .
The Coverage and Comms Strategy settings enable you to limit the amount of data the display
sends out. For this to be effective, it is recommended that you limit the data sent out for all
displays in the group .
Setting Explanation
Coverage
ll All Layers: This transfers all applied layers for the Field-
IQ system.
l Layer 1 only: This setting limits transfer and receiving of
data to only the first product.
Comms Strategy
ll Original: All displays always broadcast data. Every
display in the workgroup is talking always and at the
same time. This slows down communication traffic
across the DCM and is used for heavy traffic
workgroups.
l Round-Round Robin: Each display takes turns
communicating information to the rest of the work
group. Displays talk one at a time instead of the
original format.
Version 9.25, Revision B FM-1000 Integrated Display User Guide 293
To Next Page
Loading...