Trimble FM-1000 - Page 62

Basic system settings 3 Basic settings
Column Description Units
true North.
Height Mean sea level height of ground. meters
Local_Time Local time. hh:mm:ss.s
Logging_On Coverage logging flag (1=on, 0=off). On or off
Num_Stats Number of GPS satellites. –
Offline Offline distance from swath center
line.
meters
Pitch The pitch. Attribute Not Populated –
Relative_Height Height. meters
Roll The roll. Attribute Not Populated –
Speed GPS-derived ground speed. kph
Status_Text GPS status description. –
Swath_Num Current swath/headland number.
Swath_Wdth Swath width. meters
Target The target rate at the current
position.
–
Total_Qty Total volume of material as applied
for the current field. Only supported
for the Aerial Flow Controller, Autocal
Flow controller, and Crophawk Flow
Meter.
–
Units Units.
Attribute Not Populated
metric
UTC_Date Point creation date. YYYYMMDD
UTC_Time UTC time. hh:mm:ss.s
Version Track attribute file version. –
Yaw The yaw. Attribute Not Populated –
62 FM-1000 Integrated Display User Guide Version 9.25, Revision B