April 2017
6-22
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
GP 17, GP 18
Launch Issue
General Procedures and Information
GP 18 Environmental Data
Operating
• Temperature range: 10 to 32 degrees C (50 to 90 degrees F).
• Relative humidity: 15 to 85%.
• Altitude: 0 to 2500 metres (0 to 8200 feet).
•Noise:
NOTE: Blue Angel Europe criteria measured in accordance with RAL-UZ 122.
– Table 1 contains the maximum value in decibels of noise that can be generated by
the basic machine.
– Table 2 contains the maximum value in decibels of noise that can be generated by
the machine in other configurations.
Storage
• Altitude: 0 to 3100 metres (0 to 10170 feet).
• Maximum temperature 48 degrees C (118 degrees F).
Fusing Fan Temperature
controlled slow
or fast rotation
Temperature
control in
stop or rotate
(slow)
Temperature
control in stop
or rotate (slow)
Off Off
Marking Fan Temperature
controlled,
either stopped
or slow or fast
rotation
Temperature
control led
either stop or
slow rotation
Temperature
control led
either stop or
slow rotation
Off Off
ESS (Refer-
ence only)
Operating state Standby Standby Ready to
receive
Inactive
Table 4 IOT states
Sub-System Run Mode Ready Mode
Low Power
Mode Sleep Mode
Sub Power
Off Mode
Table 1 Maximum noise limits, basic machine
PPM Standby (dBA) Run Continuous (dBA) Run Impulse (dBA)
45 35 56 59
55 35 56 61
Table 2 Maximum noise limits, all configurations
PPM Standby (dBA) Run continuous (dBA) Run Impulse (dBA)
45 35 59 63
55 35 59 63
To Next Page
Loading...
Need help?
General
