EasyManua.ls Logo

Xerox VersaLink B7030

Xerox VersaLink B7030
1341 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
April 2017
2-418
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
033-363, 033-500 to 033-507
Launch Issue
Status Indicator RAPs
033-363 Fax Card Reset (Reboot) RAP
033-363 The controller reset the fax card because the fax card did not respond.
Procedure
Perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.
033-500 to 033-507 Remote Machine Error RAP
033-500 Modem CS operation error.
033-501 The number of receive line is 0.
033-502 There was no response for up to the 3rd post message.
033-503 T1 timeout has occurred.
033-504 T2 timeout has occurred.
033-505 T5 timeout has occurred.
033-506 DCN received.
033-507 No receiving capability in the remote machine.
Procedure
Perform the steps that follow:
1. Advise the customer to check the status of the remote machine, If the remote machine is
good, repeat the operation.
2. If the fault persists, perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.

Table of Contents

Other manuals for Xerox VersaLink B7030

Related product manuals