Xerox VersaLink B7030

April 2017
6-58
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
dC355, dC500
Launch Issue
General Procedures and Information
dC355 Hard Disk Diagnostics
Purpose
To initialize hard disk or perform the failure prediction test.
Procedure
1. Enter Diagnostics, GP 1.
2. Touch dC500 Hard Disk Diagnostics.
3. Touch Failure Prediction Test or Initialize Hard Disk.
4. Follow the UI messages, then touch Start.
5. The result is displayed. Touch Close.
6. Touch Close to return to the Hard Disk Diagnostics screen.
7. Touch Back to return to the Diagnostics screen.
dC500 Blank Page Threshold Value
Purpose
To set the value that is used to determine what is a blank page when performing blank fax
detection.
Procedure
1. Enter Diagnostics, GP 1.
2. Touch dC500 Blank Page Threshold Value.
3. Follow the UI messages.
4. Touch Start.
5. A single side is then scanned and the threshold value coefficient is displayed and set.
6. Touch Close to return to the Diagnostics screen.
7. Exit diagnostics, GP 1.