Xerox VersaLink B7030 Service Manual

April 2017
2-127
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
016-401, 016-403, 016-430
Status Indicator RAPs
Launch Issue
016-401 802.1x EAP Type Not Supported RAP
016-401 802.1x Authentication method mismatch (the authentication server does not support
the authentication method of the machine). A fail signal, which indicates that the authentication
method set in the machine cannot be processed, was received from the authentication device
switch that is physically connected to the machine via the network.
Procedure
Advise the customer to:
1. Set the authentication method of the machine to be the same as the one set in the
authentication server.
2. Check the 802.1x authentication method from the UI.
016-403, 016-430 802.1x Certificate Failure RAP
016-403 802.1x authentication certificate mismatch. The root server certificate for the authenti-
cation server is not stored in the machine or it is mismatched.
016-430 The route certificate of the server certificate (for network 2) of the authentication
server is not stored in the machine or it does not match.
Procedure
Advise the customer to:
1. Store the root server certificate for the authentication server in the machine.
2. If the root certificate of the server certificate cannot be obtained, disable the 802.1x set-
ting item ‘Verify Server Certificate’ in the device.

Xerox VersaLink B7030 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Copy Speed	Up to 30 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 kbps
Duplex Printing	Automatic
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android, Mopria
Control Panel	7-inch color touchscreen
Memory	2 GB
Print Speed	30 ppm
Supported Media Sizes	A4, A5, A6, B5, B6, Letter, Legal, Executive
Connectivity	USB, Ethernet, Wi-Fi
Processor	1 GHz
Scan Speed	Up to 55 ipm