April 2017
2-583
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
133-710
Status Indicator RAPs
Launch Issue
133-710 Tray Select Fail RAP
133-710 When printing fax-received documents, it was performed via the bypass tray since the
selected tray cannot be used for fax.
Procedure
Perform the steps that follow:
1. Advise the customer to load the correct the paper size and type for fax printing or specify
the tray for fax printing.
2. If the fault persists, perform the steps that follow:
a. Switch off, then switch on the machine, GP 10.
b. Reload the software, GP 4.
To Next Page
Loading...
