Xerox VersaLink B7030

April 2017
2-375
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
027-727, 027-728
Status Indicator RAPs
Launch Issue
027-727 Extension Server Parameters RAP
027-727 Application interface during web service - invalid parameter.
Procedure
Perform the steps that follow:
1. Advise the customer to check the parameters for creating a job flow.
2. If the fault persists, reload the software, GP 4.
027-728 Extension Server File Exceeded RAP
027-728 The number of files requested to be sent exceeded the maximum number of files that
can be sent during Web service interface (this occurs when a single-page document is being
stored).
Procedure
Perform the steps that follow:
1. Advise the customer to set a job so that the maximum number of files that can be sent will
not be exceeded.
2. If the fault persists, reload the software, GP 4.