April 2017
6-25
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
GP 20, GP 21
General Procedures and Information
Launch Issue
GP 20 First Copy/Print Out Time and Power On Time
Refer to Table 1. The first copy out time (FCOT) is the duration from the start copy request to
the delivery of the first copy to the output destination. Values are based on a standard job
where the original is copied at 100% from the document glass or DADF onto A4 LEF paper fed
from tray 1.
The first print out time (FPOT) is the duration from the print job request to the delivery of the
print in the centre catch tray. Values are based on paper fed from tray 1.
GP 21 Restriction of Hazardous Substances (RoHS)
Purpose
To provide information on the RoHS Directive.
The RoHS Directive restricts the use of certain hazardous substances in electrical and elec-
tronic equipment. It applies to equipment placed in the European Union (EU) market. The
directive takes effect from 1st July 2006.
NOTE: Currently these restrictions are only for the European Union (EU) market and some
associated countries. For more information go to www.Xerox.com. However, Xerox has man
-
dated that all Xerox® VersaLink® B7025/B7030/B7035 machines must be maintained as
RoHS compliant.
The hazardous substances are:
• Lead (Pb)
• Mercury (Hg)
• Cadmium (Cd)
• Hexavalent Chromium (Cr 6+, Cr [VI])
• Polybrominated Diphenyl Ethers (PBDEs)
• Polybrominated Biphenyls (PBBs)
Identification of a RoHS Compliant Machine
Xerox will maintain a central list of RoHS compliant machines.
All Xerox® VersaLink® B7025/B7030/B7035 machines are RoHS compliant at time of manu-
facture.
Procedure
CAUTION
Failure to comply with RoHS guidelines can result in product recalls, imprisonment, fines or
penalties.
Use only spares that are listed in the Xerox® VersaLink® B7025/B7030/B7035 Spare Parts
List. Do not use spare parts from other similar machines, even if the parts look identical. All
Xerox® VersaLink® B7025/B7030/B7035 machines are RoHS compliant at time of manufac
-
ture and must be maintained as RoHS compliant.
Table 1 Machine timing
Description Response Time Notes
FCOT from the document glass to
centre tray
25ppm - 6.8 seconds
30ppm - 5.4 seconds
35ppm - 5.4 seconds
A4 or 8.5x11 LEF
FCOT from the DADF to centre
tray
25ppm - 9.3 seconds
30ppm - 7.9 seconds
35ppm - 7.9 seconds
A4 or 8.5x11 LEF
FPOT 25ppm - 10.4 seconds
30ppm - 9.1 seconds
35ppm - 9.1 seconds
A4 or 8.5x11 LEF
Recovery from low power mode 25ppm - 15.5 seconds
30ppm - 17.6 seconds
35ppm - 19.7 seconds
From low power mode to ready
to copy, print or fax
Recovery from sleep mode 25ppm - 27.8 seconds
30ppm - 30.3 seconds
35ppm - 32.9 seconds
From sleep mode to ready to
print or copy
Main power on time to ready to
print
40 seconds or less
Sub power on time to ready to
print
29 seconds or less
To Next Page
Loading...
Need help?
General
