Xerox VersaLink B7030 Service Manual

April 2017
2-220
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
017-728, 017-729
Launch Issue
Status Indicator RAPs
017-728 Scan Job Flow Document Fail RAP
017-728 MS Word or MS Excel is specified as the output format in the instructions, but the tar-
get document for processing does not possess the conditions required for format processing.
Procedure
Perform the steps that follow:
1. Advise the customer to:
a. Change output format to other than MS Word, MS Excel.
b. Start Job Flow Service after satisfying all conditions below:
• The document for processing is a scan document.
• The document for processing is full color.
• Size of the document for processing is 50x50mm or more, 297x432mm or less.
• Color space of the document for processing is standard color space.
• Resolution of the document for processing is 300dpi.
• Magnification of the of the document for processing is 100%.
2. If the fault persists, reload the software, GP 4.
017-729 Temporary Error in PDL Transfer RAP
017-729 Temporary inability to send due to maximum jobs exceeded at the destination
machine, or spool area of print data full, etc.
Procedure
Advise the customer to:
1. Set the spooling of the print data at the destination machine to hard disk.
2. Change spooling setting to Spool to Hard Disk.

Xerox VersaLink B7030 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Copy Speed	Up to 30 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 kbps
Duplex Printing	Automatic
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android, Mopria
Control Panel	7-inch color touchscreen
Memory	2 GB
Print Speed	30 ppm
Supported Media Sizes	A4, A5, A6, B5, B6, Letter, Legal, Executive
Connectivity	USB, Ethernet, Wi-Fi
Processor	1 GHz
Scan Speed	Up to 55 ipm