Xerox VersaLink B7030 Service Manual

April 2017
2-505
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
116-319, 116-320, 116-345
Status Indicator RAPs
Launch Issue
116-319 Controller and UI Configuration RAP
BSD-ON: BSD 2.1 Control Panel
116-319 A mismatch between the installed ROM and UI.
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine, GP 10.
2. Ensure that all connectors on the UI assembly, PL 2.05 Item 7 and the ESS PWB, PL
3.10 Item 6 are securely connected. Ensure all surface mounted modules on both PWBs
are securely connected.
3. Reload the software, GP 4.
4. If the fault persists, install new components as necessary:
• UI assembly, PL 2.05 Item 7.
• ESS PWB, PL 3.10 Item 6.
116-320, 116-345 Process Error RAP
116-320 Fatal error of the STREAMZ. A problem has occurred in the software processing and
it is unable to continue with the subsequent processes.
116-345 Token Ring Control IC Access error.
Procedure
Switch off, then switch on the machine, GP 10.

Xerox VersaLink B7030 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Copy Speed	Up to 30 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 kbps
Duplex Printing	Automatic
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android, Mopria
Control Panel	7-inch color touchscreen
Memory	2 GB
Print Speed	30 ppm
Supported Media Sizes	A4, A5, A6, B5, B6, Letter, Legal, Executive
Connectivity	USB, Ethernet, Wi-Fi
Processor	1 GHz
Scan Speed	Up to 55 ipm