April 2017
2-24
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
003-753, 930, 933, 003-754 to 003-756
Launch Issue
Status Indicator RAPs
003-753, 930, 933 300dpi Cannot be Scanned RAP
003-753 300/400/600dpi unavailable for DADF mixed 2-sided mode scan.
003-930 For scanning in the DADF mix duplex mode, 300dpi, 400dpi and 600dpi are not avail-
able.
003-933 For scanning in the DADF mix duplex mode, 300dpi, 400dpi and 600dpi are not avail-
able (when the next document exists).
Procedure
Perform the steps that follow:
1. Advise the customer to perform scanning below 200 dpi resolution or perform scanning in
other than mixed mode.
2. If the fault persists, reload the software, GP 4.
003-754 to 003-756 S2X Error RAP
003-754 A recoverable error was detected.
003-755 Command error returned from the PWB.
003-756 All scanned documents were detected as blank.
Procedure
Perform the steps that follow:
1. Advise the customer to cancel the job, then retry the job.
2. If the fault persists, reload the software, GP 4.
To Next Page
Loading...
Need help?
General
