Xerox VersaLink B7030

April 2017
2-25
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
003-757, 931, 934, 003-760, 003-761
Status Indicator RAPs
Launch Issue
003-757, 931, 934 400dpi Cannot be Scanned RAP
003-757 400/600dpi unavailable for DADF mixed 2-sided mode scan.
003-931 For scanning in the DADF mix duplex mode, 400dpi and 600dpi are not available.
003-934 For scanning in the DADF mix duplex mode, 400dpi and 600dpi are not available
(when the next document exists).
Procedure
Perform the steps that follow:
1. Advise the customer to perform scanning below 300 dpi resolution or perform scanning in
other than mixed mode.
2. If the fault persists, reload the software, GP 4.
003-760, 003-761 Scan Settings Error RAP
003-760 The job properties are incorrect.
003-761 Tray selection error.
Procedure
Perform the steps that follow:
1. Advise the customer to correct the job properties.
2. If the fault persists, reload the software, GP 4.