Xerox VersaLink B7030

April 2017
2-289
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
021-360, 021-361
Status Indicator RAPs
Launch Issue
021-360 EP Accessory Fail RAP
021-360 An error occurred in the connection to the EP accessory. The accessory that should
be installed is not found.
Procedure
Perform the 016-357 Controller EP Communication Fail RAP.
021-361 EP Accessory Type Configuration Error RAP
021-361 EP accessory type setting error.
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Enter dC131. Ensure NVM value 850-007 is set correctly.
2. If the fault persists, perform the 016-357 Controller EP Communication Fail RAP.