Xerox VersaLink B7030 Service Manual

April 2017
2-107
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
016-214, 016-215, 016-216
Status Indicator RAPs
Launch Issue
016-214 SW Option Fail (Fax Card) RAP
016-214 The fax card was not installed or an error was detected when SW optional function
was enabled.
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine, GP 10.
2. Ensure all fax PWBs are correctly installed, PL 20.05.
016-215, 016-216 SW Option Fail RAP
016-215 The scanner functions cannot be executed due to a JPEG board error or JPEG board
not installed.
016-216 The system detected that the extension memory was not installed.
Procedure
WARNING
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to GP 10. Disconnect the power cord. Electricity can cause
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine, GP 10.
2. Install a new ESS PWB, PL 3.10 Item 6.

Xerox VersaLink B7030 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Copy Speed	Up to 30 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 kbps
Duplex Printing	Automatic
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android, Mopria
Control Panel	7-inch color touchscreen
Memory	2 GB
Print Speed	30 ppm
Supported Media Sizes	A4, A5, A6, B5, B6, Letter, Legal, Executive
Connectivity	USB, Ethernet, Wi-Fi
Processor	1 GHz
Scan Speed	Up to 55 ipm