Xerox VersaLink B7030

April 2017
2-22
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
003-705, 003-750
Launch Issue
Status Indicator RAPs
003-705 Energy Saving Paper Size Mismatch RAP
003-705 A paper size mismatch error was detected when exiting energy saver mode.
Procedure
Perform the steps that follow:
1. Advise the customer to cancel the job, then retry the job.
2. If the fault persists, reload the software, GP 4.
003-750 Insufficient Documents Duplex Book RAP
003-750 The number of documents is insufficient for duplex book print.
Procedure
Perform the steps that follow:
1. Advise the customer to change the parameters, then retry the job.
2. If the fault persists, reload the software, GP 4.