April 2017
2-221
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
017-730, 017-731
Status Indicator RAPs
Launch Issue
017-730 Network Error in PDL Transfer RAP
017-730 Network occurred during PDL data transfer.
Procedure
Advise the customer to:
1. Check the connection of the network cable.
2. Check the destination machine is powered on.
3. Check that the IPP port of the destination machine is enabled.
017-731 POP Server Not Connected RAP
017-731 Failed to connect to the POP server.
Procedure
Perform the steps that follow:
1. Advise the customer to check that network communication between the POP server and
the machine is available:
a. Check that the POP server IP address that is set in the machine is correct.
b. Check the connection of network cables.
To Next Page
Loading...
Need help?
General
