April 2017
2-262
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
018-596, 018-700, 018-701 to 018-705
Launch Issue
Status Indicator RAPs
018-596, 018-700 Network Error RAP
018-596 An undefined protocol error, and other errors with LDAP protocol.
018-700 Network stack is not initialized fail.
Procedure
Advise the customer to wait for a while, then perform the same operation again.
018-701 to 018-705 LDAP Protocol Errors 01 to 05 RAP
018-701 LDAP protocol error 01 at address book operation (operation error).
018-702 LDAP protocol error 02 at address book operation (operation error).
018-703 LDAP protocol error 03 at address book operation.
018-704 LDAP protocol error 04 at address book operation (too many search results to be pro-
cessed).
018-705 LDAP protocol error 05 at Address Book operation (comparison request result is
false)
Procedure
Verify that print jobs are printing or print a configuration report and verify that network setup
settings are indicated.
The printer is operational or the configuration report indicates
valid network settings.
YN
Check for damage with the network connection. If there is no damage then there is a
problem with the network. Inform the customer that the network requires service.
There is a problem with the LDAP setups on the machine or with the remote LDAP server.
Advise the customer to verify the machine LDAP setups. If the check is good, there may be a
problem with the remote LDAP server.
To Next Page
Loading...
Need help?
General
