April 2017
2-335
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
026-400, 026-402
Status Indicator RAPs
Launch Issue
026-400 USB Host Connection Number Exceeded RAP
026-400 The number of machines that are connected to the USB Host Port of this machine has
exceeded the maximum permissible number of connections.
Procedure
Perform the steps that follow:
1. Switch off, then switch on the machine, GP 10.
2. Advise the customer to disconnect some of the machines that are connected to this USB
host port and ensure that the number of connected machines are below the maximum
permissible number of connections.
026-402 Changed IOT Speed RAP
026-402 The IOT has started the print at a low speed.
Procedure
For information only, no service action necessary.
To Next Page
Loading...
Need help?
General
