April 2017
3-6
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
IQ2
Launch Issue
Imaqe Quality
Regular toner contamination in the pro-
cess direction on side 2.
Xerographics There is a regular pitch toner contamination in the process direction on side 2. Perform the IQ16 Regular Toner
Contamination in the Process
Direction (Side 2) RAP.
Residual image (ghosting) Xerographics Ghost images appear on the paper. Parts of the previous page or current page may appear as ghost
images on the paper.
Perform the IQ3 Residual Image
(Ghosting) RAP.
Skew Xerographics Printed images are not parallel to the edges of the paper. Perform the IQ8 IOT Skew RAP.
Smear Transfer Black lines or blank areas running along the paper across the process direction. Perform the IQ17 Smear RAP.
Toner droplet contamination Xerographics Toner spills on the paper and smears in a long, narrow shape. Perform the IQ5 Toner Smears
RAP.
Toner splattering Xerographics There are many uneven black spots on parts of paper. Perform the IQ6 Toner Contami-
nation RAP.
Toner streak Xerographics A long thin line in the process direction. The length can range from 2mm (0.08 inch) to over 10cm (4
inches). This occurs in solids or halftones, it does not occur in the background.
Perform the IQ24 Toner Streak
RAP.
Unfused image Fusing Printed images are not correctly fused onto the paper. When rubbed, the image comes off easily. Perform the IQ21 Unfused Copy/
Toner Offset RAP.
White spots Transfer Toner spots and blank areas are spread irregularly over the whole page. Perform the IQ19 White Spots
RAP.
Table 1 IQ defects
Image Quality Defect Subsystem Symptom Action
To Next Page
Loading...
Need help?
General
