Xerox VersaLink B7030

April 2017
4-155
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
REP 60.8
Repairs and Adjustments
Launch Issue
4. Remove the CRU upper guide assembly, Figure 2.
a. Remove the screw (1).
b. Remove the CRU upper guide assembly. (2).
Figure 2 CRU upper guide assembly removal
5. Pull up the tab (1), move the CRU guide toward the rear, then remove it, Figure 3.
Figure 3 CRU guide removal
6. Release the catches in the direction of the arrows, then disconnect the FFC cable (1), Fig-
ure 4.
Figure 4 FFC cable
7. Remove the print head assembly, Figure 5.
a. Remove the screw (1).
b. Remove the print head assembly (2).
Figure 5 Print head assembly removal