308-06-119 Manual Transaxle External Controls 308-06-119
REMOVAL AND INSTALLATION (CONTINUED)
E6707 EN 07/2001
Installation
1. Install the gearshift mounting.
2. Adjust the gearshift mechanism. For
additional information,
refer to Section 308-
00.
3. NOTE: If the gearshift stabilizer cannot be
installed without stress, loosen the
engine/transaxle mounting and align.
Install the gearshift stabilizer and shift rod.
1. Attach the shift rod
2. Attach the shift rod stabilizer
4. Tighten the engine / transmission mounting
(if necessary). For additional information,
refer to Section 303-0
1A. For additional
information,
refer to Section 303-01B.
5. Install the exhaust heat shield.
To Next Page
Loading...
