Ford 2002 Bantam - Page 1104

412-00-11 Climate Control System — General Information 412-00-11
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
3 Measure the voltage between fuse F13 and
ground.
• Is battery voltage indicated?
 Yes
GO TO B5.
 No
REPAIR the power supply of the fuse F13.
TEST the system for normal operation.
B5: CHECK THE POWER SUPPLY OF RELAY – A/C W.O.T
1. 2.
Relay – A/C WOT
C18
3.
4 Measure the voltage between relay socket –
A/C W.O.T, connector C18, pin 2, circuit 14-
CA11 (VT/YE) and ground.
• Is battery voltage indicated?
 Yes
GO TO B6
 No
REPAIR the open circuit(s) between fuse
F14 and relay – A/C W.O.T by using the wir-
ing diagrams. TEST the system for normal
operation.
B6: CHECK THE POWER SUPPLY OF RELAY – A/C W.O.T
1 Measure the voltage between relay socket –
A/C W.O.T, connector C18, pin 3, circuit 14-
CA67 (VT/BK) and ground.
• Is battery voltage indicated?
 Yes
GO TO B7
 No
REPAIR the open circuit(s) between fuse
F14 and relay – A/C W.O.T by using the wir-
ing diagrams. TEST the system for normal
operation.
E9425 EN 07/2001 2002 Bantam