412-00-12 Climate Control System — General Information 412-00-12
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
B7: CHECK THE A/C CO SSOR CLUTCH MPRE
1.
2 Connect a jumper wire at the relay socket –
A/C W.O.T, connector C18, between pin 3, cir-
cuit 14-CA67 (VT/BK) and pin 5, circuit 14S-
CA1 (VT/BU).
3.
• Is the A/C compressor clutch engaged?
Yes
GO TO B10
No
GO TO B8
B8: CHECK CIRCUIT 14S-CA6 (VT/YE) FOR OPEN
1.
2.
A/C compressor
clutch C75
3.
Relay – A/C
W.O.T C18
4.
5 Switch on the A/C system and the heater
blower system.
E9425 EN 07/2001 2002 Bantam
To Next Page
Loading...
