412-00-32 Climate Control System — General Information 412-00-32
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
D11: CHECK THE RELAY – A/C RE-CIRCULATION FLAP
1 Check the relay – A/C re-circulation flap
according to the Component Testing attached
to the wiring diagrams.
• Is the relay OK?
Yes
GO TO D12
No
INSTALL a new relay – A/C re-circulation
flap. TEST the system for normal operation.
D12: CHECK THE CONTROL CIRCUIT OF THE RELAY – A/C RE-CIRCULATION FLAP
1.
Re-circulation
switch C353
2.
3 Measure the voltage between re-circulation
switch, connector C353, pin 2, circuit 14-CA66
(VT/OG), harness side and ground.
• Is battery voltage indicated?
Yes
GO TO D13
No
REPAIR the open circuit(s) between fuse
F13 and re-circulation switch by using the
wiring diagrams. TEST the system for nor-
mal operation.
D13: CHECK THE RE-CIRCULATION SWITCH
1.
E9425 EN 07/2001 2002 Bantam
To Next Page
Loading...
