412-03-8 Air Conditioning 412-03-8
REMOVAL AND INSTALLATION (CONTINUED)
5. Detach the A/C compressor from the
mounting bracket.
CAUTION: Cap the refrigerant lines and
the A/C compressor to prevent dirt in-
gress.
6. Disconnect the refrigerant lines and remove
the A/C compressor.
• Discard the O-ring seals
Installation
NOTE: Install new refrigerant line O-ring seals.
NOTE: Coat the refrigerant line O-ring seals in
clean refrigerant oil prior to installation.
1. To install, reverse the removal procedure.
E6726 EN 07/2001 2002 Bantam
To Next Page
Loading...
