412-03-12 Air Conditioning 412-03-12
REMOVAL AND INSTALLATION (CONTINUED)
3. Fit the compressor drive plate.
1. Compressor pulley
2. Insert a spacer washer from spacer
washer set to set the gap.
3. Fit the compressor drive plate and check
the gap at several places around the
circumference.
4. Install the air-conditioning compressor. For
additional information,
refer to Air-conditioning Compressor in this section
5. Check the operation of the air conditioning
system.
E1260 EN 07/2001 2002 Bantam
To Next Page
Loading...
