412-03-25 Air Conditioning 412-03-25
REMOVAL AND INSTALLATION (CONTINUED)
1. Refit the components in reverse order.
• Switch off the air conditioning.
• Switch off the engine.
• Remove the by-pass from the plug of the
air conditioning low pressure switch.
• Connect the plug of the air conditioning
low pressure switch.
2. Standard finishing operations.
• Connect the battery negative lead.
• Remove the protective covers.
• Enter the radio keycode.
• Reprogram the preset radio stations.
• Reset the clock.
• Road test the vehicle to collect data for
the PCM.
3. Check the operation of the air conditioning
system.
E1261 EN 07/2001 2002 Bantam
To Next Page
