414-01-7 Battery, Mounting and Cables 414-01-7
REMOVAL AND INSTALLATION (CONTINUED)
E6741 EN 07/2001 2002 Bantam
5. Disconnect the in-line electrical connectors
below the thermostat housing.
6. Detach the electrical cables below the
battery tray.
7. Detach the battery to starter motor solenoid
cable from the transaxle mounting bracket.
8. Remove the engine undershield.
For additional information,
refer to Section 502-00.
9. Detach the battery to starter motor solenoid
cable from the transaxle.
BACK TO CHAPTER INDEX
FORD BANTAM PAGES FROM MANUAL
TO MODEL INDEX
To Next Page
Loading...
