414-01-8 Battery, Mounting and Cables 414-01-8
REMOVAL AND INSTALLATION (CONTINUED)
E6741 EN 07/2001 2002 Bantam
10. Detach the battery to starter motor solenoid
cable from the oil filter housing.
11. Disconnect the crankshaft position (CKP)
sensor and oil pressure switch electrical
connectors.
12. Disconnect the starter motor electrical
connector.
13. Disconnect the generator electrical
connector and remove the battery to starter
motor solenoid cable.
BACK TO CHAPTER INDEX
FORD BANTAM PAGES FROM MANUAL
TO MODEL INDEX
To Next Page
Loading...
