415-00-5 Audio System — General Information 415-00-5
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
A7: CHECK CIRCUIT 29 MD15/74-MD15 FOR CONTINUITY -
1.
Battery ground ca-
ble
2.
Fuse 2 (10 A)
3.
Fuse 19 (10 A)
4 Using a digital multimeter, measure the
resistance between the output side of:
- fuse 2 (10 A) and the audio unit C52, pin1,
circuit 29-MD15 (OG/BK).
- fuse 19 (10 A) and the audio unit C52, pin 3,
circuit 74-MD15 (BU/BK).
• Is the resistance greater than 0.1 ohms?
Yes
REPAIR circuit 29-MD15 (OG/BK)/74-MD15
(BU/BK) as appropriate. TEST the system
for normal operation.
No
CHECK the CJB and associated circuits,
GO TO A8
A8: CHECK CIRCUIT 29-MD15/74-MD15 FOR SHORT
1 Using a digital multimeter, measure the
resistance between the audio control unit C52:
- pin 1, circuit 29-MD15 (OG/BK) and ground.
- pin 3, circuit 74-MD15 (BU/BK) and ground.
• Are the resistances greater than 10,000 ohms?
Yes
INSTALL a new audio unit.
No
REPAIR circuit 29-MD15 (OG/BK) or 74-
MD15 (BU/BK) as appropriate. TEST the
system for normal operation.
A9: CHECK THE RADIO RECEIVER, CASSETTE PLAYER FOR CORRECT OPERATION
1.
2 Switch the radio receiver on.
E6747 EN 07/2001 2002 Bantam
To Next Page
Loading...
