Ford 2002 Bantam - Page 1347

417-01-29 Exterior Lighting 417-01-29
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
3 Check which stop lamp is inoperative.
• Is the stop lamp at the left-hand side
inoperative?
 Yes
GO TO I4
 No
GO TO I2
I2: CHECK THE POWER SUPPLY OF RE R LAMP ASSEMBLY, RIGHT-HAND SIDE A
1. 2.
Rear lamp assem-
bly, right-hand side
C42
3.
4 Depress the brake pedal.
5 Measure the voltage between rear lamp
assembly, right-hand side, connector C42,
circuit 14S-LG38 (VT), harness side and
ground.
• Is battery voltage indicated?
 Yes
GO TO I3
 No
REPAIR the open circuit(s) between splice
S37 and the rear lamp assembly, right-hand
side, by using the wiring diagrams. TEST
the system for normal operation.
I3: CHECK GROUND CONNECTION OF REAR LAMP ASSEMBLY, RIGHT-HAND SIDE
1.
E6752 EN 07/2001 2002 Bantam
BACK TO CHAPTER INDEX
FORD BANTAM
CONTINUED
TO MODEL INDEX
PAGES FROM MANUAL