Ford 2002 Bantam - Page 1367

417-01-46 Exterior Lighting 417-01-46
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
L17: CHECK THE POWER SUPPLY OF SIDE TURN SIGNAL LAMP, RIGHT-HAND SIDE
1.
Side turn signal
lamp, right-hand
side C144
2 Measure the voltage between side turn signal
lamp, right-hand side, connector C144, pin 2,
circuit 49-LG13 (BU/RD), harness side and
ground.
• Is battery voltage indicated?
 Yes
GO TO L18
 No
REPAIR the open circuit(s) between splice
S35 and side turn signal lamp, right-hand
side, by using the wiring diagrams. TEST
the system for normal operation.
L18: CHECK THE GROUND CONNECTION OF SIDE TURN SIGNAL LAMP, RIGHT-HAND SIDE
1 Measure the resistance between side turn
signal lamp, right-hand side, connector C144,
pin 1, circuit 31-LG13 (BK), harness side and
ground.
• Is the resistance less than 2 ohms?
 Yes
CHECK the side turn signal lamp, right-hand
side. If necessary INSTALL a new one.
TEST the system for normal operation.
 No
REPAIR the open circuit(s) between side
turn signal lamp, right-hand side and ground
G6. TEST the system for normal operation.
L19: CHECK THE POWER SUPPLY OF REAR TURN SIGNAL LAMP, RIGHT-HAND SIDE
1.
Rear turn signal
lamp, right-hand
side C66
E9426 EN 07/2001 2002 Bantam
BACK TO CHAPTER INDEX
FORD BANTAM
CONTINUED
TO MODEL INDEX
PAGES FROM MANUAL