Ford 2002 Bantam - Page 1386

417-01-62 Exterior Lighting 417-01-62
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
Q2: CHECK THE CIRCUIT TO TRANSMISSION SWITCH FOR OPEN
1.
Fuse F13 (CJB)
2.
Transmission switch
C51
3.
4 Measure the voltage between transmission
switch, connector C51, pin 2, circuit 14-LG28
(VT/WH), harness side and ground.
• Is battery voltage indicated?
 Yes
GO TO Q3
 No
REPAIR the open circuit(s) between fuse
F13 and transmission switch, by using the
wiring diagrams. TEST the system for nor-
mal operation.
Q3: CHECK THE TRANSMISSION SWITCH FOR PROPER FUNCTION
1.
2 Connect a jumper wire between transmission
switch, connector C51, pin 2, circuit 14-LG28
(VT/WH) and pin 1, circuit 14S-LG36 (VT/BK),
harness side.
3.
• Does the reversing lamp illuminate?
 Yes
INSTALL a new transmission switch. TEST
the system for normal operation.
 No
GO TO Q4
E6755 EN 07/2001 2002 Bantam
BACK TO CHAPTER INDEX
FORD BANTAM
CONTINUED
TO MODEL INDEX
PAGES FROM MANUAL