417-01-66 Exterior Lighting 417-01-66
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
3 Check the fuse F14 (15 A).
• Is the fuse OK?
Yes
GO TO S2
No
INSTALL a new fuse F14 (15 A). If the fuse
blows again, LOCATE and REPAIR the
short circuit by using the wiring diagrams.
TEST the system for normal operation.
S2: CHECK THE POWER SUPPLY OF FUSE F14
1.
2 Measure the voltage between fuse F14 (CJB)
and ground.
• Is battery voltage indicated?
Yes
GO TO S3
No
REPAIR the power supply of fuse F14, by
using the wiring diagrams. TEST the system
for normal operation. If necessary INSTALL
a new CJB.
S3: CHECK POWER SUPPLY OF RELAY – FOG LAMPS
1.
2.
Fuse F14 (CJB)
3.
Relay – fog
lamps C320
4.
E9428 EN 07/2001 2002 Bantam
BACK TO CHAPTER INDEX
FORD BANTAM
TO MODEL INDEX
PAGES FROM MANUAL