Ford 2002 Bantam - Page 1392

417-01-68 Exterior Lighting 417-01-68
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
S6: CHECK THE RELAY – FOG LAMPS FOR PROPER FUNCTION
1.
Relay – fog lamps
C320
2 Connect a jumper wire between relay socket –
fog lamps, connector C320, pin 3, circuit 14S-
LD11 (VT/WH) and pin 5, circuit 14-LD9
(VT/BK).
3.
• Do the front fog lamps illuminate?
 Yes
INSTALL a new relay – fog lamps. TEST the
system for normal operation.
 No
REPAIR the open circuit(s) between front
fog lamp, left-hand side and ground G9.
S7: CHECK THE FRONT FOG LAMP SWITCH FOR PROPER FUNCTION
1 Turn the multifunction switch to the OFF posi-
tion.
2.
Front fog lamp
switch C328
E9428 EN 07/2001 2002 Bantam
BACK TO CHAPTER INDEX
FORD BANTAM
CONTINUED
TO MODEL INDEX
PAGES FROM MANUAL