418-00-7 Module Communications Network 418-00-7
DIAGNOSIS AND TESTING (CONTINUED)
CONDITIONS
DETAILS/RESULTS/ACTIONS
E5: CHECK THE ISO 9141 LINE TO THE ANTI-THEFT/CENTRAL LOCKING MODULE FOR OPEN
1.
2.
Anti-theft/central
locking module
C330
3 Measure the resistance between anti-
theft/central locking module, connector C330,
pin 17, circuit 4-MB13 (GY), harness side and
data link connector C31, pin 7, circuit 4-DA1
(GY), harness side.
• Is the resistance less than 2 ohms?
Yes
CHECK with the WDS.
No
REPAIR the open circuit(s) between splice
S74 and data link connector by using the
wiring diagrams. TEST the system for nor-
mal operation.
E9429 EN 07/2001 2002 Bantam
BACK TO CHAPTER INDEX
FORD BANTAM
TO MODEL INDEX
PAGES FROM MANUAL
CONTINUED
To Next Page
Loading...
