501-10-5 Seating 501-10-5
REMOVAL AND INSTALLATION (CONTINUED)
2. Move the seat fully rearwards.
3. Tighten the seat in the following sequence.
1. Tighten the front inner retaining bolt.
2. Tighten the front outer retaining bolt.
4. Move the seat fully forwards.
5. Tighten the seat in the following sequence.
1. Tighten the rear inner retaining bolt.
2. Tighten the rear outer retaining bolt.
Vehicles with driver air bag
6. Connect the safety belt buckle pre-
tensioner electrical connector.
E9364 EN 07/2001 2002 Bantam
FORD BANTAM
TO MODEL INDEX
PAGES FROM MANUAL
BACK TO CHAPTER INDEX
To Next Page
Loading...
