501-11-11 Glass, Frames and Mechanisms 501-11-11
REMOVAL AND INSTALLATION (CONTINUED)
Installation
All vehicles
1. Install the front door window glass.
2. Install the door glass weather strip.
3. NOTE: Do not fully tighten the retaining
screws at this stage.
Attach the front door window glass to the
window regulator (power window shown).
• Install the retaining screws.
4. Align the retaining screws with the access
holes.
• Raise the front door window glass.
E6777 EN 08/2001 2002 Bantam
FORD BANTAM
TO MODEL INDEX
PAGES FROM MANUAL
CONTINUED
BACK TO CHAPTER INDEX
To Next Page
Loading...
