501-11-12 Glass, Frames and Mechanisms 501-11-12
REMOVAL AND INSTALLATION (CONTINUED)
5. Tighten the retaining screws.
Vehicles with manual windows
6. Remove the window regulator handle.
Vehicles with power windows
7. Disconnect the window control switch
electrical connector.
All vehicles
8. Install the door glass top run retainer.
9. Attach the watershield to the door panel.
10. Install the front door trim panel. For
additional information, refer to Section 501-
05.
E6777 EN 08/2001 2002 Bantam
FORD BANTAM
TO MODEL INDEX
PAGES FROM MANUAL
BACK TO CHAPTER INDEX
To Next Page
Loading...
